Technician utilization is the number most field service operators say they track and fewest measure the same way twice. Get the definition wrong and you'll chase the wrong fixes. This guide gives you a clean formula, a worked example, the places hours usually leak, and the levers that actually move the number.
The short answer
- Utilization is billable hours divided by paid hours. Wrench time and billable hours are related, but they aren't the same thing, and mixing them hides problems.
- Most lost hours go to travel, admin, waiting for parts or information, and repeat visits. Each one can be measured separately.
- One point of utilization is worth paid hours times 1% times your revenue per billable hour. Work that out for your business before you buy anything.
Three numbers that get confused
Before you set a target, agree on what you're counting. These three terms show up in every operations review, and they mean different things.
| Measure | What it counts | What it hides |
|---|---|---|
| Billable hours | Hours you actually invoice, or attribute to invoiced flat-rate work | Nothing about where the rest of the day went |
| Wrench time | Hands-on working time at the job, billable or not | Warranty work and callbacks count as productive even though nobody pays for them |
| Utilization | Billable hours as a share of paid hours | Pricing problems: a technician can be fully utilized on underpriced work |
Wrench time is a term borrowed from plant maintenance, and published wrench-time benchmarks mostly come from that world, where definitions vary from study to study. Be careful comparing yourself with them.
For a revenue-generating service business, utilization is the number that ties to the P&L. Use the other two to explain it.
The formula, with a worked example
Utilization = billable hours ÷ paid hours.
Use paid hours, including overtime, PTO you pay for, and training, not scheduled hours. Scheduled hours make the denominator look smaller and the result look better than your payroll does.
Here's an illustrative branch. The numbers are made up to show the arithmetic:
- 10 technicians × 2,080 paid hours = 20,800 paid hours a year.
- Time splits 60% billable, 20% travel, 12% admin, and 8% waiting for parts, approvals, or information.
- Billable hours: 20,800 × 60% = 12,480. Utilization is 60%.
- At $150 per billable hour, that's 12,480 × $150 = $1,872,000 in labor revenue.
Now the useful part. One extra point of utilization is 20,800 × 1% = 208 hours. At $150 an hour, each point is worth $31,200 a year for this branch, with no new hires. Five points is $156,000. That's the number to hold up against any proposal that claims to raise productivity.
Illustrative numbers from this guide. Each extra point of utilization is worth $31,200 a year at $150 an hour.
View the data
| Time | Share | Hours |
|---|---|---|
| Billable | 60% | 12,480 |
| Travel | 20% | 4,160 |
| Admin | 12% | 2,496 |
| Waiting for parts or approvals | 8% | 1,664 |
Where the hours go
Travel
Drive time is usually the biggest non-billable block. It grows when territories overlap, when jobs are booked first-come rather than by geography, and when emergency calls break up a planned route. To give you a sense of scale, SAP reports that Patterson Dental saved 13 minutes of unbilled travel per billed hour after adopting SAP's field service software with a routing add-on. That's a vendor-published result for one company, so treat it as an indication of what's possible rather than a benchmark.
Admin
Paperwork, photos, notes, timesheets, and calls to the office. Much of it repeats information that already exists somewhere else. Track it by asking technicians to log closeout time for two weeks, or pull the gap between "work complete" and "job closed" timestamps from your system.
Waiting
Waiting for parts, for a customer approval, for a supervisor, or for the office to answer the phone. It rarely appears in reports because nobody codes it. If your field system lets technicians put a job "on hold" with a reason, use it.
Repeat visits
Every return trip costs travel plus labor you usually can't bill. Aquant, which sells AI software for service teams, reports in its 2025 benchmark that top performers fix 86% of jobs on the first visit against 53% for bottom performers, and that a failed first visit adds two more visits on average. Even at your own rate, the math adds up fast.
Continuing the illustrative branch: if the average job runs 2 billable hours, that's 12,480 ÷ 2 = 6,240 jobs. An 8% repeat-visit rate means about 499 return trips. At 2.5 unbilled hours each, including travel, that's about 1,248 hours, or roughly $187,200 of capacity at $150 an hour.
Levers that actually move the number
- Measure the split first. You can't fix travel if it's buried in a single "non-billable" bucket. Code time into billable, travel, admin, waiting, and training, even roughly.
- Book by geography. Cluster planned work into zones and days. Leave room for emergencies instead of letting them reshuffle the whole board.
- Prepare the job before the truck leaves. Customer history, equipment details, likely parts, and prior notes reduce both waiting and repeat visits.
- Capture information once. If the technician enters it on site, it should flow to the invoice and the customer record without anyone retyping it.
- Close the loop on repeat visits. Review every return trip weekly by cause: wrong part, wrong skill, misdiagnosis, or customer not ready. The fix is different for each.
- Match skills to jobs. Sending a junior technician to a complex diagnostic job costs a second visit. Keep a skills matrix and use it at dispatch.
Don't push utilization toward 100%. You need slack for emergencies, training, and travel you can't avoid. The goal is to turn wasted time into billable time, not to remove every buffer.
Why this matters more now
Adding headcount is getting harder. The U.S. Bureau of Labor Statistics projects employment of HVAC mechanics and installers to grow 11% from 2025 to 2035, much faster than average, with about 40,600 openings a year. When technicians are scarce, the hours you already pay for are your cheapest source of capacity.
Five questions for your next operations review
- Are we dividing by paid hours or scheduled hours? Pick one definition and use it in every branch.
- What share of the day goes to travel, admin, and waiting? If you don't know, start coding time for two weeks.
- What is our repeat-visit rate, and what causes it? Measure it over a fixed window, such as 30 days.
- What is one point of utilization worth to us? Paid hours × 1% × revenue per billable hour.
- Which single leak is the largest? Fix that one first and measure again before you move on.
Where to go from here
Start with your own split of hours and the value of one point. If you'd like help finding where capacity goes in your branches, tell us how your field operation runs today. We build the automation and software that targets these leaks, so weigh our view accordingly. You can see how we approach it on our Field Services page.
Sources
- U.S. Bureau of Labor Statistics: Heating, Air Conditioning, and Refrigeration Mechanics and Installers
- SAP News: Patterson Dental improves customer experience with streamlined field service management
- Industrial Machinery Digest: Aquant 2025 Field Service Benchmark Report
- Aquant: 2025 Service Benchmark Report insights